You ask for welded wire mesh and receive something flimsy – or just plain wrong. Not ideal when you’re up against tight deadlines.

Warped panels, rough welds or patchy galvanising aren’t just frustrating – they’re a risk to your project and your reputation.

We keep things on track with clear lead times and honest updates – so you can plan with confidence.

We work with a range of materials including steel mesh, welded wire fabric and galvanised mesh. Mesh size, wire gauge and finish can all be customised to suit your project.

We’re happy to work from your drawings or help refine a concept. We’ll make sure it’s practical and buildable before we begin.

Both. We handle everything from one-off prototypes to regular bulk runs. Just let us know what you need and we’ll work around it.

We offer raw, galvanised and powder-coated finishes. If you’ve got something specific in mind, we’ll help you choose the best option for the job.

It depends on the size and complexity of your order. We’ll give you a clear lead time upfront, and stick to it.

Yes, we can arrange delivery direct to your site or chosen location. We’ll handle the logistics so you don’t have to.

Inconsistent blackodising doesn’t just look unprofessional – it can compromise protection and the overall impression of your product.

We ensure even tone and full coverage – no blotches, no inconsistencies. Just a smooth, uniform black finish.

We blackodise mild steel components. Not sure if your parts are suitable? Just ask and we’ll give you a clear answer.

Blackodised steel has a smooth, matte black appearance. It’s subtle, uniform, and provides light corrosion resistance.

While not indestructible, blackodising is a reliable way to protect steel from rust and wear in indoor or light industrial settings.

Yes, we can blackodise your supplied parts or include it as part of a full fabrication project. Just let us know what you need.

Our process uses minimal chemicals and produces very little waste. We comply with all current safety and disposal regulations.

Turnaround time depends on the size and volume of parts. We’ll always provide a realistic lead time, no false promises.

If the plastic doesn’t bond properly, it lifts off the material. That’s bad news for both durability and appearance.

Uneven coatings make displays look patchy or low-quality – not the impression you want to leave.

We take the time to get the coating right – no patchy spots or rough edges. Just a smooth, consistent finish.

From plastic-coated wire mesh to custom metalwork, we coat to your design – no fuss, no drama.

We typically coat mild steel and wire mesh. If you’ve got something else in mind, just ask – we’ll let you know what’s possible.

Yes. Our coatings are built to resist moisture, rust, and general wear – ideal for retail and transport environments.

Absolutely. We offer a wide range of colours. If you have a brand colour or specific finish in mind, just let us know.

We do both. If you just need plastic coating, no problem. If you need fabrication and coating, we’ve got that covered too.

We use high-quality coatings designed to last. They resist cracking, flaking, and corrosion under normal use.

It depends on the job size and spec, but we’ll always give you a clear lead time, and stick to it.

If powder coating isn’t applied correctly, it won’t last. We’ve seen it chip, peel, or look patchy – not what you want.

We prep thoroughly, coat evenly, and cure to spec, so your finish looks sharp and stays intact.

You’ll always know what’s happening. We say what we’ll do, and then we do it.

We typically coat metals like steel and aluminium. If you’re unsure, just ask – we’re happy to advise.

Yes, we offer a wide range of RAL colours and finishes. Let us know what you need and we’ll guide you through the options.

Timeframes depend on the size and complexity of the job, but we’ll always give you a clear lead time upfront.

We’re set up for items like retail display components. If it fits in our oven, we can coat it – just check the dimensions with us.

Absolutely. Whether it’s a prototype or a small run, we provide practical solutions with no minimum order.

In most cases, yes. Powder coating gives a tougher, more even finish that stands up to wear and tear.

What arrived doesn’t fit. Now you’re chasing fixes and rework you didn’t plan for.

You’ve got a last-minute change. You call. You email. Nothing. In the end, you’re left guessing, or starting over.

We don’t cut corners or make assumptions. You send the file, we deliver it to spec in aluminium, mild steel or stainless.

We’ll tell you what’s possible, what’s not, and when it’ll be done. No fluff, just honest lead times you can rely on.

With decades of experience in sheet metal fabrication, we build parts that hold up – on the shop floor or out on the road.

We regularly work with aluminium sheet, mild steel and stainless steel. Got something else in mind? Just ask and we’ll let you know if it’s possible.

If you’ve got a sketch or rough idea, we can help turn it into a production-ready file. If it’s already drawn up, even better.

It depends on the job, but most sheet metal work is completed in 1–3 weeks. We’ll confirm a clear lead time when we quote.

Yes, we’re set up for prototypes, one-offs and small batch runs, as well as larger production jobs. Just tell us what you need.

Absolutely. We’re based in Yorkshire and always happy to show you how we work. Just give us a call to arrange a visit.

Yes, we can take care of powder coating, polishing and other finishes based on your spec. Let us know what your project needs.

We deliver clean, accurate joins every time – whether it’s MIG, TIG or spot welding. No surprises, no rough edges.

We’ll tell you exactly what we can do and when – then stick to it. No empty promises, just reliable work delivered on time.

You’ll speak directly with the person doing the work. No middlemen – just straight answers and timely updates.

We offer MIG and TIG welding, primarily on steel and Spot Welding. If you’re unsure which method suits your project, we’ll help you decide.

Absolutely. Whether it’s a prototype or a limited run, we’re equipped to handle small-scale welding jobs with care and consistency.

Our main focus is steel welding. If you need work on another metal, get in touch – we’ll let you know if it’s something we can do.

We rely on skilled hands, proper prep and a consistent process. Every weld is inspected as part of our standard quality checks.

Of course. Give us a call first so we can pop the kettle on and make sure the right person’s available for a chat.

It depends on the job size and specifications, but we’re always upfront about timings. Send us the details and we’ll give you a clear estimate.